ADT 800 - Technical Data

Connected Load : ADT - 800/4SH

No. of Position	32	40	48	56	64	72	80	88	96	104
Drive Load Kw	12	12	14 3	18 8	19 5	21 0	27 7	27 7	29 6	29 6
Draw Hot Pin Kw	3.6	4.5	5.4	6.3	7.2	8.1	9	9.9	10.8	11.7
Set Heater Kw	4.8	6	7.2	8.4	9.6	10.8	12	13.2	14.4	15.6
Misc. Kw	8	8	8	8	8	8	10	10	10	10
Total Kw	28.4	30.5	34.9	41.5	44.3	47.9	58.7	60.8	64.8	66.9
Additional Heater Kw.  ADT-800/4DH	2.6	3.3	3.9	4.6	5.2	5.9	6.5	7.2	7.8	8.5

Connected Load : ADT - 800/2SH

No. of Position	32	40	48	56	64	72	80	88	96	104
Drive Load Kw	12	12	14 3	18 8	19 5	21 0	27 7	27 7	29 6	29 6
Draw Hot Pin Kw	3.6	4.5	5.4	6.3	7.2	8.1	9	9.9	10.8	11.7
Set Heater Kw	4.8	6	7.2	8.4	9.6	10.8	12	13.2	14.4	15.6
Misc. Kw	8	8	8	8	8	8	10	10	10	10
Total Kw	28.4	30.5	34.9	41.5	44.3	47.9	58.7	60.8	64.8	66.9
Additional Heater Kw.  ADT-800/4DH	2.6	3.3	3.9	4.6	5.2	5.9	6.5	7.2	7.8	8.5

M/. Length Mtr.	7.89.210.612.013.414.816.217.619.020.4
M/c. Width	3.20 Mtr.
M/c. Height	3.20 Mtr.
Feed Creel (box Type)	One/two Ends Per Position With Transfer Tail For each Ends & 500 mm Centre Distance.
Denier Range	Up To 600 Denier Resultant, (subject To Jet Selection)
Feed Yarn	Pes, Pp, Pa, Acrylic, (poy Or Foy) Viscose And Spun Yarn.
Possible Process	Single, Parallel And Core-effect.
Draw Heater	Vapour Phase open Contact Hot Pin Type Group Heater.
Set Heater	1.2 Mtr. Long Close Contact Type Vapour Phase Group Heater With Temperature Range 125 Degree C. To 250 Degree C.
Take-up Tube	69 Dia X 290mm Length.
Take-up Package	250mm Traverse, Biconical, 250mm Dia And Up To 6.00 Kg. Content.
Compressor Capacity	Dependent To Jet Selection and No. of Positions
Water Supply	3.0 Litre Demineralised Water / Position / Hour (subject To Water Head Selection)