Rotary Creel : With close yarn path having suitable yarn guide placement upto first feed.
Yarn Drive (all feed shaft) : With individual Steel roll for each end having low inertia with larger dia aluminum hub nip roll and self centering mounting for assured yarn feed. (second shaft with Apron yarn drive).
Close/Open Type Primary Heater : With three guide yarn entry assembly & optimized track contact pressure and track surface with well qualified heat insulation.
An exclusive cooling zone with tangential path on tube periphery with forced cooling and process stability provision.
AFTECH-III with 55mm dia , 9mm thick P.U disc and knife edge tailing disc & capable of adopting O.L.T sensor.
Fourth feed (2B shaft) with I.M Jet manifold placed between fourth and second yarn feed enabling controlled and settable intermingling results.
Heater 1.4 mt. (Std. is 1.6 mt P.H. & 1.25mt SH) with 12 end & 24 ends resp. close type group heater with well qualified insulation minimizing radiation losses.
Excellent designed 64 mm dia grouved oiler rolls minimizing oil splash and enhancing uniform oil application.
Multy stroke settable and synchronized axial and cyclic traverse disturbances.
An exclusive traverse speed profile within stroke enhancing uniform density across traverse and depth of package.
Precise package system (PPS) with uniform package contact pressure assurance through out the built.
Traverse protection guard avoids accidents during doffings.
All yarn drive shaft provided with yarn traversing.
Battery back-up and Inverter driven individual yarn drives permits re-start of machine in case of emergency stop or power failure without re-threading /yarn break/raping.
Encoder feed back close loop speed control of all individual yarn drive assure upto 0.01% deviation to set value.
All parameters settings with keyboard at MMI (control) panel of AFT-11HS.
Head Office: 2, Functional Estate, Road No. 6, Udyognagar, Udhna, Surat - 394210 | Phone: +91-261-2279520/30 | Fax: +91-261-2278789
Designed by Brand Aid